Top bale will not
sit on top of the
first row
Bale carrier
Diagnostic procedure
Once loaded, the top row bale rolls off and
drops on the loading platform, not allowing
more bales to be loaded
When loading the top row
bale, the bale starts rolling
away or stays stuck in the
grabber when releasing it.
If operating the
RBMPRO’s at a steep
angle while releasing
the bale, use the
« stand-by » mode to
put the loading phase
on hold. Move the
RBMPRO to a level
terrain in order to
resume the loading
sequence.
Avoid sharp turns, abrupt starts and
stops while hooked on the RBMPRO.
Use with caution on irregular or slanted
ground
TIP: Reduce space
between previous
bale stack and pusher
to keep the top bale
If you are collecting
bales sitting on their
round side, centering
the bales in the
loading arm before
initial contact is
crucial to insure
proper stability
Trouble with
stacking second
row bales
Model(s) : RBMPRO
Summary of Contents for RBMPRO
