22
There are 2 ways of plugging in your hydraulic system:
Using a Load Sensing intake (optimal setting)
Plugging in directly on the tractors ports.
After plugging the hoses, activate the conveyors’ and the trailer bed’s
hydraulic function one by one to make sure that they are plugged in at the
right place. (see procedure REF# A-RBM-002 (manual valve levers and
functions).
To use the RBMPRO trailer, your tractor must be equipped with:
Two (2) Double action hydraulic ports/outlet ( a distributor that has an in port
and an out port 1/2 with a check valve)
One(1) return to tank
One (1) out port from the pump
One (1) Load sensing out port (See
For optimal use, it is necessary that one of the port be ribbed for continuous
pumping.
PROCEDURE REF# A-RBM-005
Connecting to the tractor (hydraulic) requirements
For more information see next page
Connecting to the tractor (hydraulic) coupling chart
Summary of Contents for RBMPRO
