52
Operator's Manual – Self-loading Trailer
Anderson Group
NOTE:
Make sure the necessary adjustments have been made
before you start loading bales. See section 4.
5.2.1 Selecting the bale dimensions and number of rows
Before you begin loading bales, first select the dimensions of the bales to be loaded.
To select the dimensions of the bales to be loaded:
1. In the settings menu, select
. The following screen will appear:
Figure 19 — Screen for Selecting Bales and the Number of Rows
2. Select the dimensions of the bales to be loaded.
3. Select the number of rows of bales to be loaded (2 or 3) by pressing
or
.
NOTE:
If you are planning to unload the bales so that they stand
upright, only load two rows of bales (see "Unloading bales"
on page 59).
The MAX column shows the maximum number of bales that can be loaded for the selected
dimensions. In some cases, two options are available for the maximum number of bales. Select the
maximum number of bales you want to load.
