Anderson Group
Self-loading Trailer – Operator's Manual
45
4.6 Adjusting the pusher travel stroke
Adjusting the pusher travel stroke increases or decreases the amount of space in front of and
behind the last row of bales that are loaded and moved by the pusher. Adequate spacing prevents
the bale on top (if applicable) from falling after it is loaded.
To adjust the spacing, adjust the position of the LS_PO_R sensor that detects when the pusher is at
the front of the trailer, as well as the LS_PO_M1 sensor that detects when the pusher is in middle 1
position and that corresponds to the distance travelled by the pusher once the row is complete.
Figure 15 — Position of the Sensors to Adjust the Pusher Travel Stroke
