Anderson RBM1400, Operator'S Manual

Page: 87 / 95

Anderson Group Self-Loading Bale Carrier – Operator's Manual 87
8. Tighten the castle nut and make the adjustments indicated in "Adjusting the wheel bearing
play" on page 83.
9. Lock the castle nut with a new cotter pin or the hair pin clip, as appropriate.
10. For hubs without grease retainers, fill the hubcap with grease.
11. Put the hubcap back on.
Figure 46 — Disassembling a Wheel Bearing
Figure 47 — Reassembling a Wheel Bearing
7.6.7 Replacing the wheel bearings
NOTE: For axles with grease retainers (Figure 45), you will need to
get new grease retainers, since they will be damaged in the
process of removing the outer races.
NOTE: Unpack the bearings at the last minute and be careful to
avoid mixing up their parts.
To replace the wheel bearings: