Anderson RBM Series, Operator'S Manual

Page: 40 / 87

40 Operator's Manual – Self-Loading Trailer Anderson Group
4.3 Adjusting the bale guides
Depending on how the bale guides have been
adjusted, the trailer may be too wide to comply with
road transport regulations.
Always follow the rules of the road.
The two bale guides on each side of the trailer prevent bales from falling out when they are being
loaded and transported. The bale guides must be adjusted to the dimensions of the bales being
transported. There must be 15 cm (6 in.) of space between the bale guides and bales.
To adjust the bale guides:
1. Remove the locking pins and locks from the bale guides.
2. Put the locking pins and locks in the desired position: A, B, C, D, E or F (see Figure 10 and
Table 8).
Figure 10 — Position of the Bale Guides
Table 8 — Position of the Bale Guides Based on Bale Diameter
Position Bale diameter
A For transport
B 1.22 m (4 ft.)
C 1.37 m (4.5 ft.)