Anderson RB-400, Operator'S Manual

Page: 21 / 52

19
Other Lubrication Points
The power transmission chains and other moving parts of the machine must be oiled or
greased regularly or every 50 hours. This also applies to the 2 toothed wheels of the plastic film
stretcher.
Figure 6.2
Lubricating the plastic film stretcher
Figure 6.3
Lubricating the chain (through the hole in the guard)
The film cutter must be lubricated daily (approximately 100 balls) where indicated in the
following figures:
IMPORTANT !
Use a antifriction lubricant to lubricate the film cutter system.
Do not use grease because it causes the accumulation of dust that affect the
lubricating.