Anderson NWS-660, Operator'S Manual

Page: 49 / 120

47
Figure 11.8 Remote starter connections 3
Start Up
Do not forget to turn the engine key to ON before using your remote control. If you do not do
this, the remote control will not work. You can leave the engine switch in ON position for
several weeks without starting the engine.
Remote Control
We remind you that the small green button (upper right corner) starts the engine. The red
button (in the center) stops the engine. A red blinker turns on briefly when the remote control
is used to indicate that the internal battery is in good condition. In case of failure, the remote
control will itself try 2 more times to start the engine. Finally, be aware that your small remote
control is not waterproof.