Anderson NWS-660, Operator'S Manual

Page: 44 / 120

42
The 12 V battery of the remote
control has lost its charge or is
disconnected.
Change the battery or check the
connection. Next, press in
alternation on the right/left
direction buttons to reprogram
remote operation.
10. The remote control
for remote operation
does not work or has
stopped working.
The remote control is too far away. Move closer to the module.
11. The remote control
for remote operation
does not start again
after the stop button
has been pressed.
The remote operation hydraulic stop
remains activated when you want to
resume wrapping.
Deactivate the hydraulic stop:
press the left arrow, then the right
arrow. Next, restart the bale
wrapper yourself by pressing the
ON button.
12. The hydraulic stop
activates itself.
Greasy residues have formed on the
piston and the vibrations of the
plastic detector have activated it.
Take apart the hydraulic stop valve
and clean the piston with a
solvent. Reinstall the hydraulic
stop valve.
13. The engine starts
with the key but does
not stop and the engine
kill switch does not
work.
The engine kill switch is defective. Disconnect the orange and black
wires. Reconnect the black wire in
place of the orange wire. Restart
the engine and stop it with the
key.