Anderson IFX720, Operator'S Manual

Page: 41 / 133

Anderson Group Round Bale Wrapper IFX720 – Operator's Guide 41
9 Options
Your wrapper can be equipped with one or more options.
The available options are described in the following
sections.
9.1 Work lights
This option includes two lights installed on the crossbar on
the right side of the machine to make it easier to work in
the evening and nighttime. The lights are connected to the
wrapper's electrical system. To turn on the lights, just use
the toggle switch on the control panel.
NOTE: The Honda engine must have an alternator
of at least 10 amps for this option to work.
With a less powerful alternator, your
battery will lose its charge.
9.2 Anderson plastic watch
This option automatically stops the wrapping process if
the plastic film breaks or if one of the rolls is empty.
To activate or deactivate the plastic watch:
1. Remove the locking pin.
2. Put the arm in the appropriate position on the
plastic watch. Put the arm in the On hole to
activate the watch and in the Off hole to deactivate
it.
3. Put the locking pin back in.
1 Deactivated
2 Activated
Figure 53 — Activating/Deactivating the Plastic
Watch
9.3 25-litre fuel tank
This option includes a 25-litre fuel tank and a control lever
to select the reservoir. The addition of this tank makes the
wrapper more self-sufficient.
Figure 54 — 25-Litre Fuel Tank
Using the fuel tanks
NOTE: With this option, your wrapper will be
equipped with two fuel tanks. Since the
optional 25-litre tank has a larger capacity
than the engine tank, you should always
use it first. Keep the engine tank for
emergencies when the optional tank is
empty.
A selector lever near the engine lets you choose the tank
that will fuel the engine. To select the 25-litre tank (large
tank), place the control lever of the valve to the left-hand
side. When this tank is empty, place the tank selector lever
to the right to select the engine tank. Make sure to keep
enough gas to allow you to finish your work.