anden.com
P.O. Box 1467
Madison, WI 53701-1467
800.972.3710 F: 608.257.4357
Printed in USA
©2019
Anden – A Quality brand from Research Products Corporation
10014465 B2208632A 12.19
Running and
programming control
The maximum humidity set point is 90% and the control comes
with the default maximum humidity set point preset to 65%. See
step 4 in
Program Mode
of ADMC manual.
Humidifier control jumper setting:
24VAC EXT.
Jumper (JP2) on right:
24VAC dry contact when
wiring terminals 7 and 8.
Sequence of
operation
1. Green lights:
a.
Solid “on/off” light indicates humidifier is turned on.
b.
1 minute flashing “on/off” light indicates power is
restored to humidifier.
c.
Steam light on means steam is being created.
d.
Fill light on means water is being added to
humidifier.
e.
Drain light on means water is draining from
humidifier.
2. Expected noises from the humidifier:
a.
Clicking noise of valve opening to add water.
b.
Clicking noise of drain valve opening during the
drain cycle.
c.
Clicking noise of the relays opening and closing
during normal operation of the humidifier.
d.
Sound of water flowing through the humidifier.
3. Humidistat will call for humidity,
a.
Steam light will turn green.
i.
Electricity will pass through the water in the
canister unit causing the water to heat to
boiling point, which sends the steam up the
hose.
ii.
On startup and steam canister replacement the
water within the canister could take at least 30
minutes to boil and several days to condition
and reach full capacity.
iii.
Once the water in the canister is conditioned,
the water will boil almost immediately.
4. Drain valve operation
a.
Any time the drain valve is activated, the Drain light
illuminates green.
For additional help
Call Anden Tech Support at 1-800-972-3710. The Quick Start
Guide is to be used as reference only. Installation is to be
in accordance with Installation and Operating Instructions
provided with the dehumidifier.
9
4
