9
Fig. 4-3-2: Rear panel
1. Circuit breaker
Switch for single-phase AC220V±15% power. Turn on this switch (on the position:
“ON”), then
the power on indicator lights up, and the fan runs.
2. Power supply cable
Three pin wires, the mixed-colored wire must be firmly grounded; the rest 2 wires connect to
1- phase AC 220V±15% 50/60Hz power supply.
3. Gas inlet
Connect with compress gas source by gas hose.
4. Fan
Cool down the heat components in the cutting machine.
4-4 Connections
Control socket
1 2
Socket Pin
Description
1, 2
Torch trigger
Table 4-4-1: Connections
Output socket
The output socket of this cutting machine is fast plug-in type.
1
2
ON
3
OFF
4
