AD-4430B
- 35 -
0 to 1
Release at near-
zero
Release when the weighing value is in the near-zero range.
0
:
Do not release.
1
:
Release.
0
This hold function only works when
(hold function) is set to 2 (peak hold) or 3 (averaging
hold). This hold function has no function when
(hold function) is set to 1 (normal hold).
(average time) works only when
(hold function) is set to 3 (averaging hold).
5.4.5.
The BCD Function
(
)
Function No.
Parameter
and range
Item name
Description
Default
value
1 to 4
Data outputting
1
:
Weighing value
2
:
Gross weight
3
:
Net weight
4
:
Data specified by BCD input
1
1 to 3
Data transfer
mode
1
:
Stream
2
:
Automatic printing
3
:
Manual printing
1
5 to 1000
Data transfer rate
5 times/second
10 times/second Display linked to
20 times/second
100 times/second
1000 times/second
20
1 to 2
Output logic of
data transfer
1
:
Negative logic
2
:
Positive logic
2
1 to 2
Output logic of
negative sign
1
:
Negative logic
2
:
Positive logic
2
1 to 2
Output logic of
status
1
:
Negative logic
2
:
Positive logic
2
1 to 2
Output logic of
strobe
1
:
Negative logic
2
:
Positive logic
2
0 to 5
Input selection
0
:
None
1
:
Clear zero
2
:
Clear tare
3
:
Changing between gross weight and net weight
4
:
Print command
5
:
key
3
0 to 12
Output selection
0
:
None
1
:
Stabilization
2
:
During tare
3
:
Near-zero
4
:
Hold busy state
5
:
HI output (Over upper limit)
6
:
OK output (Between upper and lower limits)
7
:
LO output (Under lower limit)
8
:
During operating weighing (On)
9
:
During operating weighing (1 Hz)
10
:
During operating weighing (50 Hz)
11
:
Alarm (Zero correction error and tare error )
12
:
Busy
key
1
