ANCEL X6 HD, User Manual, Page: 6 / 36

3
1.4.1 Inspection Precautions
(1) Ancel X6 HD / X7 HD can only be connected to a safety outlet
that is grounded. Before connecting, check and confirm that the
diagnostic circuit is in good condition. Otherwise, it is not necessary
to test to avoid damage to the main unit. If necessary, use a
multimeter to measure the diagnostic seat voltage.
(2) Use only the power cord supplied with the OBDSPACE
diagnostics or detected power line.
(3) Pay special attention to the effects or damage caused by
environmental factors such as acid and alkali, poison gas, and
heavy pressure.
(4) Exhaust gases from the engine contain a variety of toxic
compounds and should be avoided. Park the vehicle in a well
ventilated area before operation.
(5) Do not place the device on the vehicle's power distribution unit.
Strong electromagnetic interference can cause damage to the
equipment.
(6) After the equipment is installed successfully, before starting the
engine, make sure that the parking brake is pulled and the speed
lever is placed in the neutral or parked position to avoid accidents
when the vehicle is started.
(7) When the engine is running at a high temperature, avoid