AMD2000 Series - Servo Drive - User Manual
78
DS619-0-00-0019 - Rev 0
ANCA Motion
e.
If the device is not listed, there are a few possible things to check:
I. Incorrect network adaptor selected in the previous dialogue. Use the back
button to confirm this setting.
II. AMD2000 is not powered on. Power-on the AMD2000. Refer to section
9.6 Starting the AMD2000
for details.
III. Ethernet cable between the AMD2000 and the PC is not connected. Refer
to section
9.5 Connecting the AMD2000 to a PC
for details.
IV. Network adaptor configuration is incorrect. Refer to Section
9.4
Configuring the Network Adapter
for details.
V. Try closing the MotionBench application and then restarting.
VI. Try power cycling the AMD2000.
VII. Try rebooting the PC.
f.
The version of the firmware currently installed on the drive is indicated. If required, this
can be updated using the Update Device button. Refer to point 7 below for details.
g.
If MotionBench cannot locate the .amf file which matches the firmware currently installed
on the AMD2000 the following screen is presented. Browse to the amf file.
h.
Firmware can be downloaded from the ANCA Motion website,
under Product
AMD2000
Resources.
i.
Select Connect.
