ANATEL novus LogBox CONNECT, Instruction Manual

Page: 33 / 85

NOVUS AUTOMATION 33/85
10.
SMTP PROTOCOL
LogBox Wi-Fi is compatible with the Simple Mail Transfer Protocol (SMTP), a protocol designed to allow the sending of emails through the Internet
through an e-mail server, such as Gmail, Yahoo, etc.
LogBox Wi-Fi does not support STARTTLS encryption, i.e., it is not possible to connect to a Hotmail (Outlook) e-mail server.
This feature makes it possible to send e-mails to up to 10 previously registered recipients during alarm situations configured and specified in the
NXperience software (see section Alarms Configuration in the Configuration Software chapter).
Wi-Fi interface must be enabled for the SMTP protocol to work.
Emails sent through this protocol will contain the message configured in the SMTP tab of the
NXperience communication tab, in addition to
pertinent information regarding the alarm situation of each defined alarm, as can be seen in the example below:
From:
Logboxwifi.std@gmail.com
Date: Friday, January 25, 2019 04:09
To:
novus@novusautomation.com
Subject: Alarm Alert
HIGH TEMP ALARM
LOGBOX WAITING ROOM - SN 16501402
HIGH TEMP
Fri, Jan 25, 2019. 04:09:02 PM
CH1 > CH2 + OFFSET
LOGBOX ROOM 1 > LOGBOX ROOM 2 + 4.0
30.8 Celsius > 25.7 + 4.0 Celsius
Each email should be viewed as follow:
Message Header
From: Logboxwifi.std@gmail.com
Date: Friday, January 25, 2019 04:09
Addressee To: novus@novusautomation.com
Subject matter Subject: Alarm Alert
Message body
HIGH TEMP: Alarm
Information about the alarm
LOGBOX WAITING ROOM - SN 16501402
HIGH TEMP
Fri, Jan 25, 2019. 04:09:02 PM
CH1 > CH2 + OFFSET
LOGBOX ROOM 1 > LOGBOX ROOM 2 + 4.0
30.8 Celsius > 25.7 + 4.0 Celsius
Table 12 – E-mail example
According to what has been shown above, each email has parameters that can be configured in NXperience , as shown below:
Message Part NXperience
From:
Logboxwifi.std@gmail.com
Date: Friday, January 25,
2019 04:09
Corresponds to the sender of the email, which must be configured in the NXperience SMTP tab,
and the date and time the message was sent.
To:
novus@novusautomation.com
Corresponds to the recipient's e-mail, selected in the "Alarm Actions" section of each alarm
configured on the NXperience Alarms tab. In it, you can select up to 10 registered contacts in the
contacts’ calendar.
Each contact must first be registered in the "Recipients" section of the
NXperience SMTP tab.
Subject: Alarm Alert
Corresponds to the e-mail title, which must be configured in the NXperience SMTP tab.
HIGH TEMP: Alarm
Corresponds to the text defined as a "Message Body" of the e-mail, which must be configured in
the NXperience SMTP tab.