1.5
Manufacturer & Factory Units
Manufacturer:
Garmin Wurzburg GmbH
Beethovenstrasse 1A
97080 Wurzburg, Germany
1.6
FCC/ISED statements
Model:
MGU22
FCC ID:
IPH-03910
IC:
1792A-03910
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
This radio transmitter has been approved by the FCC/ISED to operate with the antenna types listed
below with the maximum permissible gain indicated. Antenna types not included in this list, having a
gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this
device.
Interface and frequency range
Type
Max Gain
B
luetooth & Wifi
@ 2.4GHz
Wifi @ 5GHz
¼ wave coax
¼ wave coax
-2.5 dBi
-2.8 dBi
This device complies with the FCC/ ISED RF exposure limits and has been evaluated in compliance
with portable exposure condition.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific
Absorption Rate, or SAR.
This device has been shown to be capable of compliance for localized SAR for uncontrolled
environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and has been
tested in accordance with the measurement procedures specified in ISED RSS-102 and IEEE Std. 1528-
2013.
The standards include a substantial safety margin designed to assure the safety of all persons,
regardless of age and health. The standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations.
To comply with the measured SAR value/SAR testing exclusion, the equipment must be installed and
operated with a minimum distance of 50 mm
of the human body.