ANATEL A643, Operator'S Manual, Page: 99 / 222

Anatel A643a - Calibration and Validation 99 of 220
RP
S -
J
u
ne
20
07
- E
d
it
io
n 1
2
Anatel
Operator Manual
6.6
Data History
The results of Anatel A643a calibration and validation procedures are available for review or
printout at any time through the
Data History Menu .
To access saved data:
1) With the desired Analyzer selected in any View, press the Manual Key to access its
menu selections.
2) Use the Up and Down Keys to specify Calibrations .
3) Press Enter to display its submenu.
4) Use the Up and Down Keys to specify Data History and press Enter .
5) Choose the desired test category ( Validation , System Suitability , TOC Calibration or
Conductivity Calibration ) and the test type ( Last Accepted or Last Done ). Press
Enter to display it.
Note:
Data History screens and printouts are identical to those produced during the calibration/
validation; refer to the appropriate procedure in this Section.
Fig 6-31 : Data History
Show Validate:
Show Suitabil:
X
Show TOC Cal:
Show Cond Cal:
Fig 6-32 : Show TOC Cal
Show TOC Cal
X
Last Accepted:
Last Done:
Fig 6-33 : Last Accepted