ANATEL A643, Operator'S Manual, Page: 73 / 222

Anatel A643a - Anatel A643a Setup 73 of 220
RP
S -
J
u
ne
20
07
- E
d
it
io
n 1
2
Anatel
Operator Manual
Note:
Conductivity is shown as “COND uS/cm” if it is temperature compensated.
To specify a Purge Print interval:
1) With the desired instrument selected in any View, press the Setup Key to display its
submenu.
2) Use the Up and Down Keys to specify Sensor Setup .
3) Press Enter to access its submenu.
4) Specify Display/Print from among the available selections and press Enter to display
its options.
5) Select Printer Setup and press Enter .
6) Specify Purge Print and press Enter .
7) Use the Up and Down Keys to specify one of the two Purge Print outputs:
Fig 5-38 : Purge Printout
1 SENSOR NAME
X
Timed
Paper Saver:
Disabled
Fig 5-39 : Purge Print Outputs