ANATEL A643, Operator'S Manual, Page: 72 / 222

72 of 220 Anatel A643a Setup - Anatel A643a
R
PS
-
June
20
07
-
Ed
it
io
n
12
Operator Manual
Anatel
5.6.1 Purge Printouts
Note:
Default: Timed / 1 Minute
As with the Auto TOC Mode, there are two potential Purge Print intervals: Timed generates a
purge printout at user-specified intervals; Paper Saver triggers a purge printout only when the
change in the water sample’s conductivity (or resistivity) level exceeds a userdefined
percentage in two successive analyses. The Purge Printout reports the following values:
Fig 5-37 : Selecting the Purge Mode
Table 5-3 :
Purge Printout Reports
Sensor
The
Model Number
of the instrument.
SN The Serial Number of the instrument.
ID Its Channel ID Number.
Name The user-entered name of the instrument.
Data
The Current Date
TIME The time at which the measurement was taken.
COND UNCMP The conductivity of the sample and whether it is temperature-uncompensated.
TEMP °C The temperature of the sample in °C.