ANATEL A643, Operator'S Manual, Page: 135 / 222

Anatel A643a - Analog Outputs 135 of 220
RP
S -
J
u
ne
20
07
- E
d
it
io
n 1
2
Anatel
Operator Manual
4) Use the Up and Down Keys to scroll in single increments until the desired value is
displayed.
5) Press Esc twice to retain the Zero-Scale Cond setting and return to the DAC Range
Menu .
6) Select DAC Full-Scale and press Enter .
Note:
The Full-Scale Cond value must be greater than the Zero-Scale Cond value.
7) Specify Res/Cond DAC and press Enter to display its full-scale parameter screen.
8) Use the Up and Down Keys to scroll the setting until the desired value is displayed.
Fig 9-27 : Zero-Scale Uncompensated Conductivity Display
1 SENSOR NAME
Zero-Scale Cond
01 uS/cm U
S
/
T
to change
Fig 9-28 : Zero-Scale TOC Data
Fig 9-29 : Full-Scale Uncompensated Conductivity Display