ANATEL A643, Operator'S Manual, Page: 132 / 222

132 of 220 Analog Outputs - Anatel A643a
R
PS
-
June
20
07
-
Ed
it
io
n
12
Operator Manual
Anatel
To enable/disable the External DAC Module interface:
1) With the desired Analyzer selected in any View, press the Setup Key to display its
menu.
2) Use the Up and Down Keys to specify Sensor Setup .
3) Press Enter to display the Sensor Setup Menu .
4) Specify Analysis Setup and press Enter .
5) Specify Analog Setu p and press Enter to access its parameter options.
6) With the Analog Setup Menu displayed, specify Ext DAC Module .
7) Press Enter to view its parameter screen.
8) Use the Up and Down Keys to toggle the software switch to Yes to enable this analog
output, No disables it.
Note:
On activation of the External DAC Module, an Error Code #17: “Bad DAC Module” indicates
that there is a communications problem.
9) Press Enter to save the Ext DAC Module setting.
10) Press Esc to return to the Analog Setup Menu .
X
Sensor Setup:
System Setup:
C80 Setup:
Gateway Setup:
Fig 9-20 : Setup Menu
1 SENSOR NAME
DAC Range:
X
Ext DAC Module:
DAC Modes:
Fig 9-21 : DAC Error Output Menu
Fig 9-22 : External DAC Module Screen