Analytik Jena CyBio Well vario OL3381-25-300, Operating Manual

Page: 63 / 164

CyBio
®
Well vario Release: 2017 47
Initial Start-Up & Routine Start-Up Procedure
6 Initial Start-Up & Routine Start-Up Proce-
dure
6.1 Site Requirements
6.1.1 Installation Requirements
The room which is selected for CyBio
®
Well vario installation must meet the following
environmental requirements:

Temperature range: +15 °C to +35 °C

Permissible relative air humidity:
≤
75 % at 35 °C, non-condensing
The atmosphere inside the operating room should be dust-free to a maximum possible
degree, free from drafts and free from etching vapors. You are prohibited from smok-
ing in the operating room.
For pipettor site selection, the following rules should be observed:

The operating room must have a stable, horizontal, dry and vibration-free floor.

Do not install the system directly at doors or windows nor close to sources of
electromagnetic interference.

Prevent direct exposure to sunlight and radiation emitted by heaters. Provide air
conditioning for the room if necessary.

Provide easy access to all system parts at all times and do not obstruct ventilation
slots by placing other equipment or fixtures on such inlet/outlet positions.
6.1.2 Footprint Requirements
Footprint requirements follow from the dimensional details and the type of selected
transporting unit (
→
refer to “Technical Specifications” on page 5 ). You should also
provide adequate space for supplementary units and for the PC, monitor and printer.