Analytik Jena CyBio Well vario OL3381-25-300, Operating Manual

Page: 36 / 164

20 Release: 2017 CyBio
®
Well vario
Safety Notes

Do not insert objects into a system opening and make sure that no liquid can
penetrate through openings or joints into the inner system space.

The main fuse prevents danger of fire from electrical overload situations. This fuse
must not be short-circuited. Also make sure that only a fuse of the type as speci-
fied on the back wall is used for replacement.
3.10.5 Maintenance & Care

CyBio
®
Well vario system maintenance may not be carried out by anyone other
than service personnel of Analytik Jena AG or duly authorized and properly
trained expert technicians.

Unauthorized maintenance work may cause damage to the system. For this rea-
son, operating personnel are not allowed to carry out work of any kind other
than described in chapter
→
“Maintenance & Care” .

Always turn system power off before you perform work for maintenance or
cleaning of the system. Pull the main power plug from the power socket at first.

Use a slightly moistened (not dripping-wet) piece of cloth to clean exterior sur-
faces.

Use only original accessory items and original spare parts or such accessories and
spare parts that are recommended by Analytik Jena AG (refer to chapter
→
“Accessories & Spare Parts” ). Follow all advisory notes in chapter
→
“Mainte-
nance & Care” .
3.10.6 Handling of Dangerous Substances
The system owner is solely responsible for compliance with all safety requirements in
place for the protection of persons and material goods during work involving radioac-
tive, infectious, toxic, etching, combustible and other dangerous substances.
For system operation involving dangerous substances, users are recommended to issue
their own internal operating instructions. This User Manual includes no safety notes
aimed at preventing personal injury or material damage that may be caused by sub-
stances being examined.
3.10.7 Chemical Resistance
Analytik Jena AG will refuse any responsibility for examination of aggressive substances
that may deteriorate the stability of the system or its components.

Particular caution should be used when handling leaches, acids or organic sol-
vents, because these may reduce the system's lifetime.

Use only substances that are compatible with the materials quoted herein.