AS 21hp, AS 10e
Device configuration
5
1
Device configuration
The auto-sampler AS 21hp (AS 10e) will be used in combination with:
multi N/C 3100 (N3-500 and higher)
multi N/C pharma UV
multi N/C pharma HT
multi N/C UV HS
It communicates by RS 232 interface to the firmware controller of the main unit
(analyzer), which controls its operation. All operations for movements inside the
sampler will be controlled by a firmware controller, which is located on the pcb main
board of the sampler.
Fig. 1
Block scheme
