CO Clear
User Manual
Int. Approved
Document ref: ACO-810-28
October 2018
Page 7 of 24
Copyright © 2006 Analox Ltd. All Rights Reserved.
Commercial in Confidence
3
About the product
Two variants of the Analox CO
Clear
are available.
The Analox CO
Clear
is designed to detect the presence of Carbon Monoxide in air or Nitrox
gas compressors.
The Analox CO
Clear
He
is designed to detect the presence of Carbon Monoxide in Heliox
(HeO2) gas compressors. This variant can be identified by the serial number label as
shown below.
Different versions of the instrument allow operation from:
1)
210/250V AC supply
2)
110/120V AC supply
3)
9-24V DC supply
The Analox CO
Clear
is intended to be used as a permanent installation. It provides a
digital readout of Carbon Monoxide and 2 audio and visual alarms to warn you of elevated
levels of Carbon Monoxide. The alarms are set with a small hysteresis (0.5ppm) which
means the CO concentration must fall below the alarm set point before the alarm cancels.
The instrument uses an Electrochemical cell together with state-of-the-art technology, built
in an IP65 splash proof housing and is designed to provide long, trouble free service, with
minimum maintenance.
Optional items fitted to or supplied with the unit may include the following:
1)
One or two medium duty relays
2)
Test Gas and control valve
3)
Battery Back-Up
4)
4-20mA output
Summary of Contents for CO Clear
Page 2: ......
