CO Clear
User Manual
Int. Approved
Document ref: ACO-810-28
October 2018
Page 12 of 24
Copyright © 2006 Analox Ltd. All Rights Reserved.
Commercial in Confidence
6.6
4 to 20mA output models
You may have ordered your Analox CO
Clear
with a 4 to 20mA output. A 2m cable is
factory fitted to the instrument. The 4 to 20mA output current is generated by the
instrument. The customer system should be connected to this cable as follows and as per
the following drawing:
1)
Blue wire 4 to 20mA negative
2)
Red wire 4 to 20mA positive
(Max load 150 Ω)
Summary of Contents for CO Clear
Page 2: ......
