Installation Procedure for bkSpecto
IG42955-03
16-01724 rev 00
5/16
5
Set-up Additional Transducer Holders (Optional – UA1371)
UA1371
contains two additional probe holders.
Figure 5-1: UA1371 parts
Note:
Be aware the transducer bases for left and right are not identical.
1. Remove the holders by unscrewing four screws from each of the
transducer bases.
2. Separate the stiffener, transducer bases, and the frame by
removing 3 x M5X12 screws torx #25.
3. Remove the spacer.
4. Attach the new transducer base to the two metal pins on the stiffener.
2 x Transducer Base
8 x M312 screws
2 x Cup holder
2 x Elastomer holder
