RK-350
-
Ref. RK-350
QUICK START GUIDE
Thank you for choosing
Analog Way
and the
RK-350
. By following these simple steps, you should be able
to setup and use your powerful remote Control Keypad within minutes. Discover the
RK-350
extensive
capabilities and intuitive interface while configuring your first show, and unleash your creativity for a new
experience in show and event management by
Analog Way
.
• 1 x
RK-350 (RK-350)
• 1 x Power supply cord
• 1 x DB9 (M/F) cable
• 1 x Carrying case
• 1 x Quick Start guide*
* The Quick Start guide is also available on
www.analogway.com
WHAT’S IN THE BOX
RK-350 SETTINGS
• The
RK-350
automatically detects the right versions of
the product to control. Connect the DB9 cable supplied
or an Ethernet crossover cable using the same protocol
as the connected unit.
• To control the following Seamless Switchers:
Control Mode
Seamless
Mixer
Seamless
Matrix
Quadravision
EKS550
x
x
x
QMX150
x
SMX250
x
QVU150
x
PLS350
x
x
SPX450
x
x
Navigation Menu:
To access the
RK-350
menu, press the
EXIT/MENU
button
in the control section. To highlight items in the menu which
will appear on the VFD screen, turn the scroll knob left or
right to the desired menu item. When you have reached
the desired menu item, press the
ENTER
button in the
control section to access that menu function.
Pressing the
ENTER
button when a selection has been made
sets the value to that selection in the
RK-350
memory.
When all settings have been made, press the
EXIT/MENU
button to exit sub-menus and return to the main menu.
IMPORTANT:
simply selecting a menu item will not set
it to that value. Be sure to press the
ENTER
button when
parametering the menu items.
Once you have connected your
RK-350
to your switcher,
configure the connection settings on both devices.
For a serial connection, select RS232 from the RS232/LAN
menu on both devices. (In
CONTROL
menu)
For a LAN connection, select LAN from the RS232/LAN menu
on both devices (In
CONTROL
menu), and configure each
device with a unique IP in the
LAN setup > RK-350
address
menu. The default IP on the
RK-350
is
192.168.2.141
.
Next, enter the IP of the device you wish to control in the
Lan Setup > Device address menu
.
Once your settings are correct, the
RK-350
will begin
to synchronize with the device, and you will be ready to
begin. (Wait a minute).
Button color usage:
Solid red:
#1 = Source is on the Program output
#2 = Freeze enable
#3 = Stand-by button
#4 = Mute enable
Solid green:
Solid orange:
Blinking red:
Blinking green:
#1 = Source is on Preview
#2 = Function available for modification
Unlocked sources / Shifted keys
Layer/source selected or is currently active
on the Program output
Layer/source selected or is not currently
active on the Program output
