38
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
5.1.9
Time configuration
The system time and date can be set manually, or the server can be configured to acquire time and date from
a NTP server. Time zone must be configured manually. These time settings are used for Wallclock timecode
provider and cue scheduling features (See
9.6 Triggering cues with Timecode
page 117 and
page 123)
Note
: Cue scheduling occurs in server time, date and time zone.
Fig. 26 -
Server time settings configuration
Note
: By default, the system is set to UTC Time zone. If unchanged, the default scheduling will occur based on UTC time
5.1.10
Synchronization settings
Use synchronization to clone media files, media library and cue data to other Picturall media servers.
Picturall media server can be configured to synchronization client or a synchronization server role. After
configuring the synchronization, the selected data on synchronization server will be cloned to registered
synchronization clients.
Note
: Synchronization requires each client to be compatible with the server. When changes to synchronization are applied, each client is
validated and registered for this synchronization server. Any client that fails the validation or registration is rejected and removed from the
saved clients. To pass the validation, a client must be:
1.
Online and reachable.
2.
Running identical firmware version.
3.
Configured with client role in synchronization configuration.
4.
Not registered to any other synchronization server.
5.
User management is not enabled. Restricting web access with User management also blocks use of the server as
synchronization client.
If all conditions pass, the client is registered to the synchronization server, and cannot be used with any other synchronization server until
the original server removes the client or client removes the registration manually (on client server, the registered client displays remove
registration form in Synchronization status page. Note that registration removal should only be used when the synchronization server is
no longer available.)
