133
www.analogway.com
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
11.2.4
Framelock menu on front panel display
GPU sync status can be verified from the server front panel display. Press the
Next/Status button
on the
front panel to show the Framelock menu. The OLED display menu shows the status of House sync, sync rate
and the sync status of each available output card.
- The letter
Y
in Sync Status indicates that GPU sync is active. Each output card has its own letter.
- The letter
N
indicates that the GPU sync is not active, or the GPU is not synchronized.
If
the server has two GPUs installed and the Sync status is “Y, Y”
; both GPUs are synchronized.
11.3
Performance
Fig. 119 -
Performance menu
In the
Performance
menu, monitor the performance of the system as graphs.
Use the
Enabled
checkboxes to show/hide the corresponding graphs.
Tip
: These metrics are useful to show potential problems.
Graph
Description
CPU
Average workload.
“1”
means the load is equivalent to a single CPU core being fully loaded.
“8”
means that 8 cores are fully loaded.
If the value is higher than number of CPU cores installed, the CPUs is doing more than it can
handle. However, this value does not reflect the smoothness of the playback. The average
workload can get high without affecting playback quality.
CPU_TEMP
CPU temperature in Celsius degrees.
GPU
GPU refresh rate. The server unit’s performance is fine if the indicator values match
the
display’s refresh rate. In this example the display refresh rate is 60.
GPU_DRAW
Time it takes GPU to draw one single frame. If GPU_DRAW reaches 80% of GPU_SWAP,
lower GPU load (effects, resolutions, active layers).
GPU_MEM
The amount of memory used by the GPU.
GPU_SWAP
Time it takes GPU to show one frame (except when Triple buffering is enabled). This should
always be 16.67 ms for 60Hz displays.
GPU_TEMP
GPU temperature in Celsius degrees.
GPU_TEX
The amount of data transferred to the GPU (in megabytes per second).
Table 10 -
Performance
