BROAD SCAN (HD/SDI)
PAGE 18
3-2. USING THE FRAME STORE
This function allows memorizing a frame (an image) in order to display it at any time during the show.
•
HOW TO STORE A FRAME:
c
Connect the source of the frame to be stored to the input of the BROAD SCAN. Perform and auto-setting to display
it onto the output.
d
Select the
Record frame
mode (
LOGOS/FRAME
Record Frame
): the device displays a white rectangle
corresponding to the frame selection area onto the output. Then adjust the position and size of the frame selection
area with the menu functions (
LOGOS/FRAME
Record Frame
Position – Size
).
e
Store the frame (
LOGOS/FRAME
Record Frame
Store
). The memorization starts and will take about 30
seconds.
•
HOW TO DISPLAY THE FRAME:
The FRAME can be displayed either by the front panel FRAME push button or either by the menu
(LOGOS/FRAME
Frame ON)
. Select OFF to switch OFF the frame.
NOTE:
The frame can be automatically displayed when the sync of the selected input is not anymore detected. Select
(CONTROL
Auto frame ON
) to activate this function.
