84
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
1 6
Multiviewers
Tip: Go to
Multiviewers
after all pre-configurations are set.
A Multiviewer is an output displaying a user customizable selection of Widgets as display resources. A Widget
works like a layer and can display a program, preview, input, image or timer. One Multiviewer can display up
to 24 Widgets.
In
Multiviewers
, set the Multiviewers layout and Widgets. This menu displays one or two Multiviewers
screens, depending on what is set in
Preconfig >
Multiviewers.
Note
:
- Go to
Preconfig >
Multiviewers to enable One Multiviewer or Two Multiviewers.
-Got to Setup
Multiviewers to set the Label, Signal parameters, Patterns and Image correction.
16.1
Tips and recommendations
- Widgets cannot be placed on top of each other (overlap error).
- The same source cannot be used in more than one widget per Multiviewer.
- Two widgets using the same source in both Multiviewers are displayed at the same resolution (smallest
widget).
16.2
Multiviewers menu interface
The menu
Multiviewers
behaves much like the menu
Screens
:
- Sources on the left panel:
Inputs;
Images;
Timers and
Screens.
- Widget letter icons and Bottom bar icons.
- Widget properties and Memories on the right panel.
Note: There are no transition or Program/Preview features in Multiviewers.
