64
USER MANUAL
9
Outputs
In
Outputs
, set the Label, Signal parameters, Patterns and Image correction for each output group.
Note:
Go to
Preconfig >
Screens / Aux Screens > Outputs to set output resources.
9.1
Outputs main screen
Go to
Outputs
, the outputs main screen displays all outputs in a Grid view.
The following information are displayed per output:
- Resolution
- Format and rate (on hover)
- Output capacity
- Output number
- Output label
- Screen number using that output
9.2
Output settings
In
Outputs
, click an output to open its settings. The selected output is highlighted in the interactive
rear panel and all output information is listed next to the Output preview.
- Click
Outputs
to return to the outputs Grid.
- In the header, rename the selected output.
- On the interactive rear panel, hover over an output connector to display information about this output.
- On the interactive rear panel, click an output to open its settings.
- Click
Blink LED
to identify the selected output connector on the physical rear panel of the unit.
Output group format
In
Outputs
, select an output. In
Group Format
, the following settings are displayed:
Note:
Output format settings are identical for all outputs of the same group.
Setting name
Description / Setting selection
Format
Mode
Set to follow internal rate or select a custom rate in the list
Format
Set the format for each output of the group
Summary of Contents for AQL-C
Page 121: ...www analogway com 121 USER MANUAL...
