Analog Devices SSM3582, User Manual

Page: 12 / 13

UG-934 EVAL-SSM3582Z User Guide
Rev. B | Page 12 of 13
ORDERING INFORMATION
BILL OF MATERIALS
Table 2.
Qty Reference Designator Description Manufacturer Part Number
1 Board Evaluation Board EVAL-SSM3582Z, 4-layer, 3.8" × 3" Analog Devices, Inc. EVAL-SSM3582Z
4 C1, C2, C39, C40 Multilayer ceramic capacitors, 220 pF, 50 V, NP0, 0402 Murata ENA GRM1555C1H221JA01D
1 C3 Multilayer ceramic capacitors, 1 μF, 25 V, X7R, 1206 Panasonic EC ECJ-3YB1E105K
11 C4, C7, C18, C19, C26 to
C28, C30, C38, C41, C42 Multilayer ceramic capacitors, 0.1 μF, 16 V, X7R, 0402 Murata ENA GRM155R71C104KA88D
2 C5, C6 Aluminum electrolytic capacitors, HE, 470 μF, 25 V,
105°C, 5 mm Nichicon UHE1E471MPD6
3 C8, C15, C32 Multilayer ceramic capacitors, 0.1 μF, 35 V, X7R, 0402 TDK Corp CGA2B3X7R1V104K050BB
5 C9, C10, C12, C20 to C21 Multilayer ceramic capacitors, 1 μF, 16 V, X7R, 0603 Murata ENA GRM188R71C105KA12D
3 C11, C24, C36 Multilayer ceramic capacitors, 1 nF, 50 V, NP0, 0402 Murata ENA GRM1555C1H102JA01D
2 C13, C37 Multilayer ceramic capacitors, 10 μF, 25 V, X7R, 1210 Murata ENA GCM32ER71E106KA57L
4 C14, C16, C31, C33 Multilayer ceramic capacitors, 0.22 μF, 25 V, X7R, 0603 Murata ENA GRM188R71E224KA88D
3 C17, C22, C29 Multilayer ceramic capacitors, 10 μF, 10 V, X7R, 0805 Murata ENA GRM21BR71A106KE51L
2 C23, C25 Multilayer ceramic capacitors, 10 nF, 25 V, NP0, 0603 TDK Corp C1608C0G1E103J
1 C34 Aluminum electrolytic capacitor, FC, 47 μF, 16 V,
105°C, SMD_D Panasonic EC EEE-FC1C470P
1 C35 Multilayer ceramic capacitor, 22 nF, 25 V, NP0, 0805 Murata ENA GRM21B5C1H223JA01L
3 C43 to C45 Multilayer ceramic capacitors, 10 pF, 50 V, NP0, 0402 Murata ENA GRM1555C1H100JZ01D
1 D1 Red, diffused, 6.0 mcd, 635 nm, 1206 Lumex Opto SML-LX1206IW-TR
1 J1 10-way, shroud polarized header 3M N2510-6002RB
6 J2 to J5, J31, J32 Binding posts, mini uninsulated base, through-hole Johnson 111-2223-001
9 J6, J7, J9, J12, J14, J19,
J24, J29, J30 2-pin headers, unshrouded jumper, 0.10", use Tyco
shunt 881545-2 Sullins Electronics Corp PBC02SAAN; or cut
PBC36SAAN
1 J8 4-way unshrouded header 3M
PBC02DAAN, or cut
PBC36DAAN
1 J10 9-way unshrouded header TE Connectivity 103817-2
1 J13 RCA jack, printed circuit board, through-hole
mount, right angle, yellow Connect-Tech
Products Corp. CTP-021A-S-YEL
3 J17, J18, J21 2-pin headers, unshrouded jumper, 0.10", use Tyco
shunt 881545-2 Sullins Electronics Corp PBC02SAAN; or cut
PBC36SAAN
1 J23 2-pin header, unshrouded jumper, 0.10", use Tyco
shunt 881545-2 Sullins Electronics Corp PBC02SAAN; or cut
PBC36SAAN
9 JP1 to JP5, JP8 to JP11 Three-position SIP headers Sullins PBC03SAAN; or cut
PBC36SAAN
2 JP6, JP7
2-pin headers, unshrouded jumper, 0.10", use Tyco
shunt 881545-2 Sullins Electronics Corp PBC02SAAN; or cut
PBC36SAAN
3 L1, L4, L5 Chip ferrite beads, 600 Ω at 100 MHz TDK Corp MMZ1005S601C
4 L2, L3, L6, L7 Chip ferrite beads, 180 Ω at 100 MHz,
NFZ2MSM181 Murata NFZ2MSM181SN10L
4 MTH1 to MTH14 6-32 nylon screws and 1/2" standoff Building Fasteners and
Keystone NY PMS 632 0025 PH and
1903C
2 R1, R2 Chip resistors, 2.43 kΩ ,1%, 63 mW, thick film, 0402 Vishay/Dale CRCW04022K43FKED
1 R3 Chip resistors, 475 Ω, 1%, 63 mW, thick film, 0402 Vishay/Dale CRCW0402475RFKED
7 R4, R5, R8, R10, R12,
R17, R26 Chip resistors, 47 kΩ, 1%, 63 mW, thick film, 0402 Yageo RC0402FR-0747K0L
2 R6, R9 Chip resistors, 100 kΩ, 1%, 100 mW, thick film, 0402 Panasonic EC ERJ-2RKF1003X
1 R7 Chip resistor, 75 Ω, 1%, 100 mW, thick film, 0603 Panasonic EC ERJ-3EKF75R0V
4 R11, R13, R15, R16 Chip resistors, 49.9 Ω,1%, 63 mW, thick film, 0402 Yageo RC0402FR-0749R9L
1 R14 Chip resistor, 3.01 kΩ, 1%, 100 mW, thick film, 0603 Rohm MCR03EZPFX3011
1 R18 Chip resistor, 10 kΩ, 1%, 63 mW, thick film, 0402 Rohm MCR01MZPF1002
7 R19 to R25 Chip resistors, 47.5 kΩ, 1%, 100 mW, thick film, 0603 Panasonic EC ERJ-3EKF4752V