Evaluates: MAX98365A/MAX98365B/
MAX98365C/MAX98365D
MAX98365 Evaluation Systems
One Analog Way, Wilmington, MA 01887 U.S.A. | Tel: 781.329.4700 | © 2022 Analog Devices, Inc. All rights reserved.
©
2022 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.
to ask an associate for production status of specific part numbers.
General Description
The MAX98365 evaluation system (EV system) is a
fully assembled and tested system that evaluates the
MAX98365A/B/C/D mono Class-D audio amplifier. The
EV system consists of the MAX98365 Development
Board (DEV board), Maxim’s Audio Interface Board III
(AUDINT3), and a USB cable.
It is recommended that the DEV board be evaluated with
the AUDINT3 board, as an EV system. MAX98365A and
MAX98365C support the standard I
2
S interface, and
MAX98365B and MAX98365D support standard left-jus-
tified mode. All MAX98365 variants support an 8-channel
TDM digital audio interface.
The AUDINT3 board provides a USB-to-PCM interface
in addition to a 1.8V VDD supply needed to evaluate the
DEV board. The MAX98365 DEV board requires one
additional supply input, 3V to 14V (PVDD) when evaluat-
ing using the AUDINT3 board.
board and the AUDINT3 board.
319-100884; Rev 0; 2/22
Features
●
3V to 14V Single-Supply Operation
●
I
2
S, Left-Justified, or TDM Input
●
Five Selectable Gains (9.5dB, 12.5dB, 15.5dB,
18.5dB, and 21.5dB)
●
Audio Channel Select (Left, Right, and Mono Mix)
●
Filter-Less Operation
●
Low EMI
●
Complete Hardware System with Easy Setup; No
Tools or Special Software Required
EV System Contents
●
MAX98365 Development Board
●
Audio Interface Board III
●
Micro-USB Cable
Figure 1. MAX98365 Evaluation System
