UG-548
EVAL-ADM1075MEBZ User Guide
Rev. A | Page 6 of 16
EVAL-ADM1075-ISOZ
The
) includes
the following isolators:
The ADuM1250 is used to demonstrate the I
2
C isolation
and the digital signal.
The ADuM5404 provides quad-channel digital isolation
with
iso
Power®. When the isolated section is powered,
the
iso
Power device powers the 5 V components on the
primary side of the board.
The push-buttons and switch on the isolation board (
) allow the user to control the mini evaluation
board (
). The three on-board LEDs
provide users with a direct visual indication of IC power good,
latch event occurrence, and 5 V power supply from
. The 8-way connector is used to connect the mini
evaluation board (
) to the isolation board
), and the 10-way connector is used
with the
dongle to connect the isolation
board (
) to a PC.
1
141
4-
0
04
