background image

 

EVAL-AD7383FMCZ

 Evaluation Board User Guide

UG-1770

One

 

Technology

 

Way

 

 

P.O.

 

Box

 

9106

 

 

Norwood,

 

MA

 

02062-9106,

 

U.S.A.

 

 

Tel:

 

781.329.4700

 

 

Fax:

 

781.461.3113

 

 

www.analog.com  

 

Evaluating the 

AD7383

 Dual, Simultaneous Sampling, 16-Bit, 4 MSPS, SAR ADC, 

Pseudo Differential Input 

 

PLEASE SEE THE LAST PAGE FOR AN IMPORTANT  
WARNING AND LEGAL TERMS AND CONDITIONS.

 

Rev. A | Page 1 of 16 

FEATURES 

Fully featured evaluation board for the multichannel, 

simultaneous sampling 

AD7383

 

On-board reference, reference buffer, and ADC driver 
On-board power supplies 

SDP-H1

 controller board compatible 

PC software for control and data analysis 

EVALUATION KIT CONTENTS 

EVAL-AD7383FMCZ evaluation board 

ACE

 software download instructions 

EQUIPMENT NEEDED 

EVAL-SDP-CH1Z

 (SDP-H1) controller board 

USB cable (provided in the SDP-H1 kit) 
12 V wall wart signal source (provided in the SDP-H1 kit) 
PC running Windows Vista SP2 (32-bit or 64-bit), Windows 7 

SP1 (32-bit or 64-bit), Windows 8.1 (32-bit or 64-bit), or 
Windows 10 (32-bit or 64-bit) with a USB 2.0 port 

DOCUMENTS NEEDED 

AD7383

 data sheet 

SOFTWARE NEEDED 

ACE

 software 

AD738x ACE plug-in (provided in the 

ACE

 software) 

GENERAL DESCRIPTION 

The EVAL-AD7383FMCZ is a fully featured evaluation board 
that evaluates all features of th

AD7383

 analog-to-digital 

converter (ADC). The EVAL-AD7383FMCZ is controlled by the 

EVAL-SDP-CH1Z

 (SDP-H1) system demonstration platform 

(SDP) via the 160-way SDP connector, J4. The SDP-H1 
controls the EVAL-AD7383FMCZ through the USB port of a 
PC using th

Analysis | Control | Evaluation (ACE)

 software, 

which is available to download from the ACE software page or the 

AD7383

 product page. 

The EVAL-AD7383FMCZ can be used to evaluate the 

AD7384

 

(14-bit, 4 MSPS), the 

AD4682

 (16-bit, 1 MSPS), and the 

AD4683

 

(16-bit, 500 kSPS) pseudo differential, successive approximation 
register (SAR) ADCs. Th

AD7383

 and th

AD7384

 only differ 

in the number of clock cycles when clocking out the conversion 
results, which are related to the resolution of the device. The 

AD4682

 and 

AD4683

 have a slower throughput rate than the 

AD7383

For full details on the 

AD7383

, see the 

AD7383

 data sheet, which 

must be consulted in conjunction with this user guide when using 
the EVAL-AD7383FMCZ. In addition, full details on the SDP-H1 
are available on the SDP-H1 product page, and the comprehensive 

ACE

 user guide is available on th

ACE

 software page. 

Figure 1 shows the typical setup of the EVAL-AD7383FMCZ. 

EVALUATION BOARD CONNECTION DIAGRAM 

SIGNAL GENERATOR

ANALOG FILTER

PC RUNNING EVALUATION

BOARD SOFTWARE

2339

7-

001

 

Figure 1. 

 

Summary of Contents for EVAL-AD7383FMCZ

















Reviews: