EVAL-AD5676SDZ/
EVAL-AD5676RSDZ User Guide
UG-814
One
Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 12
FEATURES
Full featured evaluation board for the
Various link options
PC control in conjunction with the Analog Devices, Inc.,
system demonstration platform (SDP)
EVALUATION KIT CONTENTS
evaluation board
ADDITIONAL EQUIPMENT AND SOFTWARE NEEDED
SDP board, includes a USB cable
Bench power supply (6 V dc)
PC running Windows 7 or later with USB 2.0 port
ONLINE RESOURCES
Documents Needed
data sheet
user guide
Required Software
ACE software
GENERAL DESCRIPTION
This user guide details the operation of the evaluation boards
for the
octal channel, voltage output digital-
to-analog converter (DAC).
The
evaluation
boards help users to quickly prototype new
circuits and reduce design time. The
from a single 2.7 V to 5.5 V supply. The
2.5 V reference giving a maximum output voltage of 2.5 V or 5 V.
The
does not have an internal reference; therefore, an
is provided on-board as a 2.5 V reference source. A
different reference voltage can be applied via the EXT_REF SMB
connector, if required.
Full data on the
are available in the respective
product data sheets, available from Analog Devices, which should
be consulted in conjunction with this user guide when using the
evaluation boards.
The evaluation boards interface to the USB port of a PC via the
SDP board. The Analysis Control Evaluation (ACE) software is
available for use with the evaluation board to allow the user to
program the
The evaluation boards are compatible with the
Blackfin® SDP controller board (
), which is available for
order on the Analog Devices website at
