UG-1253
One
Technology
Way
•
P.O.
Box
9106
•
Norwood,
MA
02062-9106,
U.S.A.
•
Tel:
781.329.4700
•
Fax:
781.461.3113
•
www.analog.com
Energy Measurement Shield with
m
Sure Autocalibration
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 8
FEATURES
Arduino-compatible, single-phase energy measurement
shield with the
Onboard shunt for line current measurement
Nominal current: 5 A
Maximum current: 10 A
Up to 240 V rms nominal line neutral voltage measurement
Arduino software library
m
Sure autocalibration and example application sketches
ADDITIONAL EQUIPMENT NEEDED
Arduino Uno, Arduino Zero, or equivalent
Voltage quick connect leads
USB micro cable
0.250 inch quick connect female connector
DOCUMENTS
data sheet
ADE9153A Technical Reference Manual
SOFTWARE
Arduino IDE 1.8.4 or later
library files
GENERAL DESCRIPTION
The EV-ADE9153ASHIELDZ is an Arduino shield compatible
with Arduino Uno, Arduino Zero, or ESP8266. The shield has
an on-board shunt resistor for line current measurement and
enables quick evaluation and prototyping of energy measurement
systems that use the
. Arduino library and application
examples are provided on the
product page to simplify
implementation of larger systems. Using
m
Sure® autocalibration,
the shield can be calibrated to measure energy with 1% accuracy
over the dynamic range without the need for expensive calibration
equipment.
HAZARDOUS HIGH VOLTAGE CAUTION
The equipment described in this user guide is connected to
hazardous line voltages. Use proper caution when connecting the
sensors and voltage leads. Ensure that the system is enclosed in
a protective casing.
