Blackfin A-V EZ-Extender Manual
1-5
A-V EZ-Extender Interfaces
J6
is a connector designated for a Micron camera sensor evaluation mod-
ule. The interface has been tested with the Micron MT9V022 camera. For
information about Micron camera sensors and evaluation boards, go to
J4
is a connector designated for an OmniVision camera sensor evaluation
module. The interface has been tested with the OmniVision OV6630AA
camera. For information about OmniVision camera sensors and evalua-
tion boards, go to
.
P4
is a connector designated for a Kodak camera sensor evaluation mod-
ule. The interface has been tested with the Kodak KAC-9628 camera. For
information about Kodak camera sensors and evaluation boards, go to
.
To connect the Blackfin A-V EZ-Extender to a camera module, first
determine the source of the PPI clock. To learn about possible clock set-
tings, refer to
“PPI Clock Setup Jumpers (JP4.1/2, JP4.3/4, JP4.5/6,
Figure 1-1. Camera Orientation
