Analog Devices ADSP2192-12 EZ-KIT LITE, Manual

Page: 26 / 50

ADSP2192-12 EZ-KIT Lite Evaluation System Manual
3-15
Memory Range Core A Core B
0x7800
0x7FFF
Reserved for monitor Reserved for monitor
0x8000
0xBFFF
16 bit data memory (DM) Reserved
0xC000
0xFFFF
16 bit data memory (DM) Reserved
0x10000
0x139FF
24-bit program memory (PM) 24-bit program memory (PM)
0x13A00
0x13FFF
Reserved for monitor Reserved for monitor
0x14000
0x14FFF
24-bit program ROM 24-bit program ROM
0x15000
0x1FFFF
Reserved Reserved
0x20000
0x20FFF
Shared memory Shared memory
Table 3-1: ADSP2192-12 EZ-KIT Lite Memory Map
3.3 Connecting With the Vi+ Debugger
In order to start debugging for the first time you must set up a session with the Debugger. To create a
new session using the EZ-KIT Lite PCI interface, follow these steps:
• Press and hold down the Control ( CTRL ) key.
•
Click the Start button on the Windows task bar, then choose Programs , VisualDSP ,
Debugger .
•
The Session List dialog box will appear. Click on New Session …. (Release CTRL key)
•
The Target Selection dialog box will appear as shown in figure 3-1.
•
Under the Debug Target menu choose EZ-KIT Lite (ADSP2192-12) . There is one supported
platform so you can leave the default selection in the Platform list.
•
Type the target a name in the Target Name field, or accept the default.
•
Select both boxes in the Multiprocessor System list box.
•
•
Click OK to return to the Session List dialog box, make sure the new session is highlighted, and
click Activate .
www.BDTIC.com/ADI