ADSP-TS201S EZ-KIT Lite Evaluation System Manual
2-21
ADSP-TS201S EZ-KIT Lite Hardware Reference
Audio (J9 and J10)
There are two 3.5 mm stereo audio jacks.
Power (J8)
The power connector provides all the power necessary to operate the
EZ-KIT Lite board.
JTAG (ZP4)
The JTAG header is the connecting point for a JTAG in-circuit emulator
pod. For more information about a JTAG custom board design or inter-
face, please refer to
EE-68
found at Analog Devices Web site.
L
Pin 3 is missing to provide keying. Pin 3 in the mating connector
should have a plug. When an emulator is connected to the JTAG
header, the USB debug interface is disabled.
[
When using an emulator with the EZ-KIT Lite board, follow the
connection instructions provided with the emulator.
Part Description
Manufacturer
Part Number
3.5 mm stereo jack
A/D ELECTRONICS
ST-323-5
Mating Connector
3.5 mm stereo plug to 3.5 mm
stereo cable
RADIO SHACK
L12-2397A
Part Description
Manufacturer
Part Number
2.5 mm power jack
SWITCHCRAFT
RAPC712X
DIGI-KEY
RAPC712X-ND
Mating Power Supply
(shipped with the EZ-KIT Lite)
7.5V power supply
CUI
DTS075400UDC-P6P-DB
