Analog Devices ADSP-BF518F EZ-Board, Manual, Page: 47 / 111

Share

Page: 47 / 111

Analog Devices ADSP-BF518F EZ-Board Manual Download Page 47

ADSP-BF518F EZ-Board Evaluation System Manual

1-25

Using ADSP-BF518F EZ-Board

Example Programs

Example programs are provided with the ADSP-BF518F EZ-Board to
demonstrate various capabilities of the product. The programs are
installed with the Vi+ software and can be found in the

<install_path>\Blackfin\Examples\ADSP-BF518F EZ-Board

directory.

Refer to the readme file provided with each example for more
information.

Background Telemetry Channel

The USB debug agent supports the background telemetry channel (BTC),
which facilitates data exchange between Vi+ and the processor
without interrupting processor execution.

The BTC allows you to read and write data in real time while the proces-
sor continues to execute. For increased performance of the BTC,
including faster reading and writing, please check our latest line of proces-
sor emulators at:

http://www.analog.com/en/embedded-processing-dsp/sharc/USB-EMU-

LATOR/products/product.html

. For more information about BTC, see the

online help.

Reference Design Information

A reference design info package is available for download on the Analog
Devices Web site. The package provides information on the design, lay-
out, fabrication, and assembly of the EZ-KIT Lite and EZ-Board
products.

The information can be found at:

http://www.analog.com/en/embedded-processing-dsp/con-

tent/reference_designs/fca.html

.

«
...
45
46
47
48
49
...
»

Summary of Contents for ADSP-BF518F EZ-Board
















































































































Reviews:

No comments