ADSP-BF518F EZ-Board Evaluation System Manual
xv
Preface
• Other features
D
JTAG ICE 14-pin header
D
Blackfin power measurement jumpers
For information about the hardware components of the EZ-Board, refer
to
“ADSP-BF518F EZ-Board Hardware Reference” on page 2-1
Purpose of This Manual
The
ADSP-BF518F EZ-Board Evaluation System Manual
provides instruc-
tions for installing the product hardware (board). The text describes
operation and configuration of the board components and provides guide-
lines for running your own code on the ADSP-BF518F EZ-Board.
Finally, a schematic and a bill of materials are provided as a reference for
future designs.
The product software installation is detailed in the
Vi+ Installa-
tion Quick Reference Card
.
Intended Audience
The primary audience for this manual is a programmer who is familiar
with Analog Devices processors. This manual assumes that the audience
has a working knowledge of the appropriate processor architecture and
instruction set. Programmers who are unfamiliar with Analog Devices
processors can use this manual, but should supplement it with other texts
(such as the
ADSP-BF51x Blackfin Processor Hardware Reference
and
Blackfin Processor Instruction Set Reference
) that describe your target
architecture.
Programmers who are unfamiliar with Vi+ should refer to the
Vi+ online Help and user’s or getting started guides. For the
locations of these documents, see