Analog Devices ADSP-2189M EZ-KIT Lite, Manual

Page: 38 / 81

Using EZ-KIT Lite Vi+ Interface
2-14 ADSP-2189M EZ-KIT Lite Evaluation System Manual
Debugging With EZ-KIT Lite
The Vi+ User’s Guide for 16-Bit Processors and online Help con-
tains most of the information you need to operate the Vi+
debugger with the EZ-KIT Lite evaluation board. Because the manual was
written using a simulator as a target, there are some differences and restric-
tions in the debugger operation when connected to a hardware target.
Loading Programs
Because you are loading programs into a hardware target, the load process
takes a slightly longer period of time then loading in the simulator. Wait
for the
Load Complete message in the Output window before you
attempt any debug activities.
To load a program, use the following procedure:
1. From the File menu, select Load .
The Open a Processor Program dialog box appears.
2. Navigate to the folder where your DSP executable file resides.
The demos supplied with the EZ-KIT Lite are located in the
..\218x\EZ-KITs\2189M\Examples
subdirectory of your Visu-
alDSP++ installation directory.
3. Select the file and click Open .
The file loads and the Load Complete message appears in the Out-
put window when the load process has completed.
Registers and Memory
To see current values in registers and memory, use the F12 key or the
Window , Refresh command.
#
Register and memory contents may not be changed while the user
program is running.