Analog Devices ADIS1700 Series, User Manual

Page: 65 / 121

Table 7-32: Read Section Response - Payload
Field Name Type Notes
Offset [sectors] U4
Num Sections U4 N; where N cannot exceed 8
M Data U1 M = N × Sector Size
Write Section
The Write Section command writes a section. Each response returns the data that was read back after the write oper-
ation (cache disabled). Whenever the bootloader receives a
Write Section command, it first invalidates the
section and then starts writing. The section is validated after a successful reception of the Validate Section com-
mand. Offset and size are expected to be expressed in sectors. The sector size is provided by Get Sections Info mes-
sage.
Table 7-33: Write Section Command - Header
Field Name Type Notes
Module ID U1 1
Reserved1 U1 NV storage medium ID
Command ID U2 0x23
Version U4 1
Reserved2 U4 0
Payload Size U4 12 + Size
Table 7-34: Write Section Command - Payload
Field Name Type Notes
Section ID U4 Section ID to write
Offset U4 Relative offset with respect to the section start
Size U4 N
× N Data U1
Table 7-35:
Write Section Response- Header
Field Name Type Notes
Module ID U1 1
Reserved1 U1 NV storage medium ID
Command ID U2 0x23
Version U4 1
Reserved2 U4 0
Bootloader Messages
7–16 ADIS1700x Vision-Sensing Camera Module User Guide