4. Select the firmware file (for example,
ADIS1700x_application_vxx.ldr
for ADIS1700x).
Recovering from a Restore Point
Complete the following steps to recover the original firmware application and its associated data.
1. Select Bootloader mode.
2. Select the
Firmware
tab.
3. Click
Restore factory firmware
.
Device Re-programmer Application
The
Device Re-programmer
application is a UI application that allows the user to reprogram a device
through the USB. This application works with the Blip-Mini and ADIS1700x devices. The application has the fol-
lowing features:
•
Installs the bootloader firmware
•
Installs the application firmware
•
Installs the ADVS200x parameters
•
Erases all data (logging, processing parameters, commissioning data, etc.)
Re-program the Device
Complete the following steps to reprogram the ADIS1700x camera module.
1. Disconnect all ADIS1700x or Blip-Mini devices from the PC.
2. Launch the Device Re-programmer demo.
3. Select the
Programmer
tab
Update Application Firmware
5–22
ADIS1700x Vision-Sensing Camera Module User Guide
