2. In the configuration panel select the
Commisioning and Parameters
tab.
3. Select the
ADVS200x
tab.
4. Modify the parameters, as required.
5. Click
Upload
icon to upload the ADVS200x parameters to the ADIS1700x device.
6. Click
Yes
when requested to save the data on the device flash.
7. Select Smart Camera mode
Setting the Defaut ADVS200x Parameters
The following steps describe how to set the default ADVS200x parameters.
1. Select Configuration mode.
NOTE:
Switching modes can take a few seconds.
Modifying ADVS200x Parameters
ADIS1700x Vision-Sensing Camera Module User Guide
5–13
