manualshive.com logo in svg

Analog Devices ADIS1700 Series, User Manual

Share
Download
Analog Devices ADIS1700 Series User Manual Download Page 23

NOTE:

This console application is only available with the development installer.

UserCaptureLoop

UserCaptureLoop

 is a console application that has the following features:

•

Connects to a device running the SNAP Framework

•

Continuously downloads the image data from each of the ADVS200x sensors in a loop running in the main
program thread

NOTE:

This console application is only available with the development installer.

ADIS1700xAPIConsole

ADIS1700xAPIConsole

 is a console application that demonstrates the interface to an ADIS1700x device.

NOTE:

This console application is only available with the development installer.

ADIS1700xGetConfig

ADIS1700xGetConfig

 is a console application that has the following features:

•

Connects to a device running the ADIS1700x application firmware

•

Downloads and displays the production parameters

•

Downloads and displays the LED status

•

Downloads and displays the IMU configuration

•

Downloads and displays the ADC readings

NOTE:

This console application is only available with the development installer.

ADIS1700xCaptureLoop

ADIS1700xCaptureLoop

 is a console application that has the following features:

•

Connects to a device running the ADIS1700x application firmware

•

Continuously downloads the image data and IMU data from the ADIS1700x in a loop that runs in a separate
thread

NOTE:

This console application is only available with the development installer.

ADIS1700xMultiSensorCaptureLoop

ADIS1700xMultiSensorCaptureLoop

 is a console application that has the following features:

•

Connects to up to three devices in parallel running the ADIS1700x application firmware

SnapSensorLibrary

5–4

ADIS1700x Vision-Sensing Camera Module User Guide

Summary of Contents for ADIS1700 Series


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands